Lace to Toe Work PRE-ORDER! - Custom Configuration - Standard Lead Time

Buy with Confidence: Purchasing a pair of handmade boots can be a little nerve-racking. At Nicks, it doesn't need to be. We will return and exchange your boots if you are concerned about the size. Boots must be in new condition to qualify.

Our boots fit pretty true to size and the Brannock Device. For those who like less toe box room, consider going down 1/2 size. Choose "build to the size I select" if you wear the same size in all footwear, your feet are fairly "normal", and you are willing to assume some risk if the boots don't fit perfectly. Choose "send me a try on pair of boots" if your feet are difficult to fit and you don't have success with off-the-shelf sizing. The Try on process can take 8 weeks before you get your try on pair. The fee covers the round trip shipping of the try on boots. For more information about sizing options visit https://nicksboots.com/resources/sizing-guide/

Our boots typically run a 1/2 shorter than your sitting Brannock measurement. Sole Sizing: Please note that although we carry a vast array of sole sizes, in some cases, the standard sole option that comes on your boot may not be available for your size foot size. This normally applies to very small feet and very wide feet. We may ask you to change the sole style due to the sole manufacture's sizing limitation. Soles that fit most sizes: V-Bar, Lug soles, 2021 Crepe Soles and sizing that don't: 430-mini, sizes 6 and shorter, 12 and longer, and wider than EE. No returns or exchanges will be permitted Made-to-Order boots. A 15% restocking fee will apply for standard configuration boot returns.

Nicks utilizes a alphabetical size scale. AA is the narrowest and FFFF is the widest. D is the most common width. E is the next most common width. Sole Sizing: Please note that although we carry a vase array of sole sizes, in some cases, the standard sole option that comes on your boot may not be available for your size foot size. This normally applies to very small feet and very wide feet. We may ask you to change the sole style due to the sole manufacture's sizing limitation. Soles that fit most sizes: V-Bar, Lug soles, 2021 Crepe Soles and sizing that don't: 430-mini, sizes 6 and shorter, 12 and longer, and wider than EE. No returns or exchanges will be permitted Made-to-Order boots. A 15% restocking fee will apply for standard configuration boot returns.

67- Classic Arch Sprung Toe: Optimum arch support and toe box depth. Similar to the 55 but has a taller toe box. This is the last that has made Nicks famous. A safety toe CANNOT be added to this last (see our safety series boots). Same last used in our legacy Ridgeline. 55 - Classic Arch Standard Toe: Excellent for those wanting good arch support and the ankle stability which is comes from being able to dig the heels into the ground. A safety toe can be added to this last (see our safety series boots). Same last used in our Ranger, Robert, Forester, Steel/Comp Toe boots). HNW - Moderate Arch Standard Toe: Low heel and lower arch for flatter feet that don't need arch support and either don't like logger heels or the logger heel interferes with work equipment. A safety toe can be added to this last (see our safety series boots). Same last used in our Traveler, Falcon, Fire Trooper, and other moderate arch boots.

Measured from top of mid-sole. 10'' - Highly recommend. Most common height for Nicks work boots. 12'' - Adds a little extra support and protection. No significant advantage over 10''. 14'' - Uncommon. Hits right at the calf. 16'' - Really only for climbers. 14'' and 16'' required a hand-cut upper.

Smooth over roughout: Our most common configuration as the smooth upper is protected by the pant leg and the foot portion takes the beating. Smooth: For those who like to keep their boots "polished" and don't need the abrasion resistance that the roughout provides. Roughout: For those working in very abrasive environment, where even the upper portion of the boot is exposed to abrasion.

Thick: better sole flexibility. 3/4'' thick sole stack. (Legacy models built this way: Ridgeline, Fire Trooper, Forester, "Contenders") Thicker: better insulation from heat, cold, and rocks; boots may be more difficult to break-in; 1'' thick sole stack. This is how our traditional Hotshot and BuilderPro boots have been made.

Select "yes" only if you are on spikes/gaffs most of the day. Lineman shanks are only for those who are climbing most of the day.

Regular - Recommended. Burn resistant only needed for welders who experience slag and sparks falling onto the welt of the boot.

V100 Lug: Recommended. Best sole for general purpose work. Tried-and-true compound has been in use by most of our boots for over 50 year. V100 Lug Honey: Same tread as the V100 Lug but much softer. Great for those standing on hard surfaces all day long as it provides a little "cushion". Wears 30% faster than the V100 Lug. V100 Lug RedX: Same as the V100 Lug but with "self extinguishing burn" and "oil resistant" properties. Default sole for all NFPA approved boots and ASTM (safety toe) certified boots.

Black - Hides all the sins. Most common for black boots. Brown - Most common for brown boots. Natural - The most natural look. Default for light duty/dress casual boot. A inexpensive way to give a darker work boot some flare/color contrast. Default ink for Honey Vibram and leather soles.

Lead-times vary based on purchasing method. Most STOCK Configuration, 6-week ship boots are completed in 6 weeks. Most boots that are not stocked and need to be built take anywhere from 16-20 weeks based on fitting methods: build to my existing size, fit kit only, fit kit and try on process, and I am choosing my size.