Woodsman

Our boots fit pretty true to size and the Brannock Device. For those who like less toe box room, consider going down 1/2 size. Choose "build to the size I select" if you wear the same size in all footwear, your feet are fairly "normal", and you are willing to assume some risk if the boots don't fit perfectly. Choose "send me a try on pair of boots" if your feet are difficult to fit and you don't have success with off-the-shelf sizing. The Try on process can take 8 weeks before you get your try on pair. The fee covers the round trip shipping of the try on boots. For more information about sizing options visit https://nicksboots.com/resources/sizing-guide/

Our boots typically run a 1/2 shorter than your sitting Brannock measurement. Sole Sizing: Please note that although we carry a vase array of sole sizes, in some cases, the standard sole option that comes on your boot may not be available for your size foot size. This normally applies to very small feet and very wide feet. We may ask you to change the sole style due to the sole manufacture's sizing limitation. Soles that fit most sizes: V-Bar, Lug soles, 2021 Crepe Soles and sizing that don't: 430-mini, sizes 6 and shorter, 12 and longer, and wider than EE. No returns or exchanges will be permitted Made-to-Order boots. A 15% restocking fee will apply for standard configuration boot returns.

Nicks utilizes a alphabetical size scale. AA is the narrowest and FFFF is the widest. D is the most common width. E is the next most common width. Sole Sizing: Please note that although we carry a vase array of sole sizes, in some cases, the standard sole option that comes on your boot may not be available for your size foot size. This normally applies to very small feet and very wide feet. We may ask you to change the sole style due to the sole manufacture's sizing limitation. Soles that fit most sizes: V-Bar, Lug soles, 2021 Crepe Soles and sizing that don't: 430-mini, sizes 6 and shorter, 12 and longer, and wider than EE. No returns or exchanges will be permitted Made-to-Order boots. A 15% restocking fee will apply for standard configuration boot returns.

67- Classic Arch Sprung Toe: Optimum arch support and toe box depth. Similar to the 55 but has a taller toe box. This is the last that has made Nicks famous. A safety toe CANNOT be added to this last (see our safety series boots). Same last used in our legacy Ridgeline. 55 - Classic Arch Standard Toe: Excellent for those wanting good arch support and the ankle stability which is comes from being able to dig the heels into the ground. A safety toe can be added to this last (see our safety series boots). Same last used in our Ranger, Robert, Forester, Steel/Comp Toe boots). FT - Moderate Arch Standard Toe: Low heel and lower arch for flatter feet that don't need arch support and either don't like logger heels or the logger heel interferes with work equipment. A safety toe can be added to this last (see our safety series boots). Same last used in our Traveler, Falcon, Fire Trooper, and other moderate arch boots.

Measured from top of mid-sole. NFPA boots must be minimum 10''. 6" - Great option to save on weight and increase ankle flex. 8'' - Very common for work boots. Industry standard. Great ankle support. 10'' - Highly recommend. Most common height for Nicks work boots. 12'' - Adds a little extra support and protection. No significant advantage over 10''. 14'' - Uncommon. Hits right at the calf. 16'' - Really only for climbers. 14'' and 16'' required a hand-cut upper.

Spring heel - The preferred heel for anyone working in the brush: choker setters, hook tenders, fallers, etc. Block Heel - Preferred by anyone wearing spikes or operating on steep terrain. Nothing is better than digging your heel in and holding as you make you way downhill with 80lbs on your back.

Soft Toe: Recommended. Maximizes toe box comfort. Work leathers are plenty durable without any structure in the toe box. 9 out of 10 customers use a soft toe. Celastic Toe: Felt-like cloth infused with a hardening resin. Keeps the toe box from "sagging". Hold the toe shape and is "bump resistant". Some big toe interference can be expected during break-in.

Some parts of the leather hide are not optimal for boots. We make matching leather goods from these parts of the hide and solid brass hardware. Add a key clip, catch all, and drink sleeve to your boot order! Assembly required.